Skip to content

The Foldpic collection / Strips

Five little keepsakes. One sheet.

Foldpic's strip maker turns phone photos into photo-booth strips and photo bookmarks, five side by side on one sheet. Print one side, cut along the tick marks and you have five small gifts for a card, a book or a wallet.

Your sheet, before the magic

12345
At a glance +
Pages
5 · 10 (free)
Sheets
1 for 5 pages
Printing
One side only
Time
about 5 min · scissors or a paper trimmer, hole punch and ribbon (bookmarks, optional)
A4 sheet
59 × 210 mm
US Letter sheet
56 × 216 mm
A3 sheet
84 × 297 mm · needs an A3 printer
US Tabloid (11×17) sheet
86 × 279 mm · needs an 11×17 printer

Strips are a fifth of the sheet's long edge and its full height: about 59 × 210 mm from A4 and 84 × 297 mm from A3 if your printer takes it.

Why make a strips at home

Strips are perfect for bursts: the same two faces pulling four expressions, a dog mid-jump, a slow-motion confetti throw. Bookmarks get a photo, a line of text and a punch circle for a ribbon.

Five strips use five pages, well within the free limit.

Five from one sheet

Each strip is a fifth of the sheet: about 59 × 210 mm from A4. Cut marks at both edges keep every strip the same width.

Booth or bookmark

Four-frame and three-frame booth strips, a photo-and-quote bookmark and a full-bleed bookmark, mixed however you like.

One side only

Glossy photo paper works because nothing prints on the back.

Party favours in minutes

Make one sheet per guest or per table and hand them out at the end of the night.

A few folds from finished

3 steps, printed on one side. The full instruction sheet with checks and a common-mistakes box comes with your PDF.

1Print 1 sheet. Landscape, 100% scale, one side only.

2Cut along the marks. Line a ruler up with the tick marks at the top and bottom edges and cut each strip free.

3Finish them. Bookmarks: punch the circle at the top and thread a ribbon or a loop of string.

Finish them: Bookmarks: punch the circle at the top and thread a ribbon or a loop of string. Photo strips: round the corners with scissors if you like, then tuck them into a card or a wallet.Punch, thread, done
3 steps: print 1 sheet, cut along the marks, finish them.
  1. Step 1: Print 1 sheet12345

    1Print 1 sheet

  2. Step 2: Cut along the marks12345

    2Cut along the marks

  3. Step 3: Finish them

    3Finish them

Before you print

Strips questions

How do I cut the strips straight?

Use the tick marks at the top and bottom edges: line a ruler up with both and cut with a craft knife, or use a paper trimmer.

Can I make bookmarks double-sided?

Not yet. Print on heavy card so the blank back looks intentional, or glue two strips back to back.

What size is a strip?

One fifth of the sheet's long edge by its full height: about 59 × 210 mm from A4 and 56 × 216 mm from US Letter.

Make your strips now

Your first project is free, up to 16 pages. No sign-up. Just you and a little creativity.